[Neuroscience] Re: stimulation electrodes

Chun-feng via neur-sci%40net.bio.net (by cfshang from ion.ac.cn)
Sun Aug 7 20:40:12 EST 2011

to add sth on Roman's

I used monopolar (spatial) tungsten electrode for stimulation.  The
(temporal) =91monopolar=92 stimulation evokes redox reaction and ruins the
insulation coating, while 'bipolar' stimulation will attenuate this trend
with bidirectional effect.  Besides, calibrating the relative strength of
the 2 phases will eliminate much stimulation artifact.

If the second phase stimulation is just after the first, without delay, the
stimulated nerve is in refractory period and then it will cause no effect.

We have the first phase as negative since it is more powerful.

On Sat, Aug 6, 2011 at 3:16 AM, r norman <r_s_norman from comcast.net> wrote:

> On Fri, 5 Aug 2011 11:58:14 -0700 (PDT), jonesmat
> <mathewjones from wisc.edu> wrote:
> >On Jul 17, 10:57 am, daniela spitz <danielaspi... from googlemail.com>
> >wrote:
> >> Hi,
> >>
> >> I would like to know the difference between monopolar and bipolar
> >> stimulating electrodes. I can imagine that the strength and actual are=
> >> being stimulated (in slices) could be changed with different sizes of
> >> bipolar electrodes. But, to select between mono and bipolar electrodes
> is
> >> bit puzzling for me. Anywhere I could get literature on this?
> >>
> >> thanks
> >> daniela
> >>
> >> ps: sorry, if this question could be a basic thing for you, but for me=
> not.
> >
> >
> >Hi,
> >
> >In reality, all electrodes have to be bipolar in some sense, because
> >there always has to be a (+) and a (-) pole in order to pass any
> >current. But when people say monopolar, they usually mean that one
> >pole is the "electrode" which you stick into the tissue, and the other
> >pole is a "ground" wire sitting far away in the bath (usually *not*
> >the same as the ground for your recording amplifier). In contrast,
> >bipolar usually means a pair of wires that are close together, like a
> >fork, that you stick into the tissue next to each other. The idea is
> >that this "should" help to restrict the electric field and make it
> >more local so that you're not stimulating things you don't want to.
> >Also, there are at least two common kinds of bipolar: 1) a pair of
> >parallel wires, or 2) an inner wire as one pole, wrapped in an
> >insulating material, which is then coated with a second conductive
> >shell. These are called "concentric" electrodes.
> >
> >Which type you use depends on your specific needs. In general, if you
> >want the most local stimulus, probably a bipolar electrode is better.
> >One can also make very small, very local stimulating electrodes by
> >using "theta" glass (i.e., double-barreled glass pipetes) that you
> >pull down to ~1um with a pipette puller. Then fill them with ACSF, and
> >run a wire down each barrel to connect to the stimulator.
> >
> There is another sense of monopolar vs. bipolar, depending on the
> words you use to describe stimulation.  A "monopolar" stimulus
> produces a voltage (or current) of one polarity, for example, you turn
> on a positive potential for a brief time, then shut it off.  This
> produces a "DC" current flow through the system.  A "bipolar" stimulus
> uses capacitative coupling to connect the stimulator to the electrode.
> Then the same positive potential produces an initial positive current
> flow which drop off exponentially with time.  When you turn off the
> stimulus, you get a negative "afterpotential" which similarly decays
> exponentially.  This produces an equal flow of positive and negative
> current through the electrode.
> The difference is that a monopolar stimulus requires non-polarizable
> electrodes.  That is the situation with a properly chlorided silver
> wire immersed in a chloride containing extracellular (or
> intraelectrode) solution.  With each stimulus pulse, one electrode
> cumulatively oxides silver to AgCl and the other reduces AgCl to
> metallic Ag.  If you have, say, platinum or stainless steel
> electrodes, there is no redox reaction at the electrode-solution
> interface, only capacitative coupling, so a bipolar stimulus is
> necessary.  Usually very brief bipolar stimulation is appropriate for
> triggering action potentials but monopolar or DC coupling is essential
> for passing current to control membrane potential.
> _______________________________________________
> Neur-sci mailing list
> Neur-sci from net.bio.net
> http://www.bio.net/biomail/listinfo/neur-sci


More information about the Neur-sci mailing list

Send comments to us at biosci-help [At] net.bio.net