Real Time 10 & 8 Bit Digital RS-422/RS-170 Analog CCD Mono Cameras
A San Diego, California based manufacturer of monochrome digital (10 or 8
bits) and (analog 10 bit video cameras) with S/N of >62dB in real time 30
frames/ second, with a defect free sensor, upgradable, with dual outputs,
has a new and informative web site!
--------------------------------------------------------------------
(((((((( The URL is: http://www.edt.com/dvc/dvc.html ))))))))))
--------------------------------------------------------------------
The company can in addition provide complete (plug and play) frame
grabbers for digital or (analog 10 bit / 1024 gray level PCI bus), Mac
Nu-bus or, Sun S-bus. SGI digital D1 output option available, as seen on
new Hot Mix 11 html SGI CD, along with custom cables, Mac and Sun imaging
software and tunable electronic filters for mono 400-1100nm range and RGB
sequential version. Feel free to e-mail requests directly, stating bus of
interest, digital or analog video interest, and application. Signal to
noise / pixel gray level depth is just as, or more important than just
spacial resolution! Is your camera only offering you 7 bits or 50dB S/N
at best, and a New England snow storm when the gain is turned up a little?
Are you facing the expensive, only 8 bit, ticking 7.5 fps slow non-real
time digital cameras. Full details on how to choose a CCD camera and
various frame grabbers listed by bus on the above web site. Yes, you can
have a 10 bit analog signal with the advantages of adding 6-9 dB
addtional gain and still have a solid 8 bit LSB for your 8 bit 256 gray
level digitizer, without dropping to 7 or 6 bits like the rest, or adding
30dB of gain for an estimated sensitivity out to 1x10-4fc@ >50% video.
Thank you.
