New, powerful kinetics program:KINTECUS

James Ianni sg928ah5 at dunx1.ocs.drexel.edu
Wed Dec 20 20:40:44 EST 1995

mmi  mmmi mmmi mmi    mm mmmmmmmmmi immmmmmmmmi   ,mmm_ i mmm     mm   gmms . 
@[   iP    @[  ]YW.   ]  P  ]@[   [  '@@      ` ,Z!    V[ ]@      ]  ,A    V[ 
@[  gf     @[  ]'@b   ]     ]@[       @@       ]@`      ! ]@      ]  W      ! 
@[ gf      @[  ] Y at .  ]     ]@[       @@       W@         ]@      ]  MW.      
@[d!       @[  ] !@W  ]     ]@[       @@   ,   @A         ]@      ]  !M at s_    
@@b        @[  ]  ]@i ]     ]@[       @@mmmW   @[         ]@      ]    VM at W.  
@PMm       @[  ]  '@W ]     ]@[       @@   '   @[         ]@      ]      ~M at m 
@['MW.     @[  ]   V at i]     ]@[       @@       M@         ]@      ]        Y at i
@[  M at .    @[  ]    M@]     ]@[       @@       ]@.        !@.     ]         @[
@[   Y at .   @[  ]    ]@@     ]@[       @@        ]b     i`  MW     [  ]      @ 
@b.  , at W_ mmmi d_    M@    ,d at b.    ,g@@______i  V+___=/   '*+___/   !=c___/f 

                  "The Ultimate Kinetics Program Module"

                 Kintecus (c) Copyright 1995 James C. Ianni.
                          All Rights Reserved.

For    :PC ( => MS-DOS 3.3) 
Subject:Chemistry, Physics, Biology & Engineering
Type   : DISABLED Shareware

[  Introduction  ]

        Kintecus is a program to model the reactions of chemical, biological,
nuclear and atmospheric processes using two input spreadsheet files: a reaction
spreadsheet and a species description spreadsheet. Kintecus can model like no
other modeler can. Absolutely NO programming, compiling nor linking required.
 A quick overview of the main features are: 

     1) the ability to model over 2,000 reactions in less than 8 megabytes
of RAM running in pure high speed 32-bit under DOS! (And because the program is
*ENTIRELY* written in ANSI-FORTRAN 77, other platforms, AIX, Cray, Sun, Mac and
Amiga are coming...)

     2) the ability to use concentration profiles of any wave pattern for
any species or laser profile for any hv. This is very useful for studying very
complicated external perturbation affects or using your own experimentally
recorded concentration profile in your model.

     3) a powerful parser with mass & charge balance checker for those
reactions that the OCR or the graduate student "supposedly" entered in
correctly but the model is yielding incorrect results or is divergent. Do you
know a kinetics program that can completely parse and check for mass/charge
balance on a reaction like this:

# Rate Constants ,  REACTIONS:
1.234e-20        , CH3(((NO2)3(CO)93)3(CH2)9)23.30H2O+ + Co2 = A--- + B++++ 

Or how about this:

# Rate Constants ,  REACTIONS:
5.043e+20        , 3.43234 (CH4(N(PO342)43(CH3)3)34)(Os(S7)8)34++++ + 199.432
X++++5CH5+ ==>
st_Too_Long_It_Seems_to_go_on_and_on_like_that_a n n o y i n g Rabbit???---- +
8 HCl + HCO3-

Kintecus is able to accurately check the above reaction for mass and charge
balance because you can create an optional name file containing common names
for species and then their mass representation. This smart mass balance can be
used for biological and nuclear reactions!
Also duplicate reaction and species checking.

     4) As you can see in the above reaction, *FRACTIONAL* coefficients for
species! Now you can finally model that last step in the Oregonator or crunch
100 elementary reaction steps in one reaction step!

     5) Quickly and easily hold one or more concentrations of any species
at a constant level just by typing the value in the field of the species.

     6) Built in support for photochemical reactions involving hv and
Loseschmidt's number. Current units supported are molecules/cm^3, moles/liter &

     7) Model reactions from femtoseconds to years! A special switch in
Kintecus allows it to output the concentration of the species that are
displayed only if its concentration has changed significantly from its past
values. This may seem like no big deal, but if you model reactions that last
from days to years you can easily generate files that are dozens of megabytes
in size or more. Such a file is nearly impossible or extremely time consuming
to plot or print, but in Kintecus a special option turns a 100-multimeg file 
into a 100 kilobyte file without any loss in data!

     8) Automatic generation of the species spreadsheet file using the
reaction spreadsheet file.

     9) The ability to do reactions in a continuous stirred tank reactor
(CSTR) with multiple inlets and outlets.

     10) Support for sensitivity analysis.

     11) The integration is carried out by an integration technique
superior to Gears with all internal matrices (reactions and jacobians) are
calculated analytically. There in NO SLOW AND USUALLY UNSTABLE

     12) Support for Excel and Lotus spreadsheet programs.

Go into MS-DOS and create a file named MODEL.DAT. Enter your reactions
like so (using a spreadsheet to do this is highly recommended):

1.323e-4, A- +Widget-- + C==>G+++ + F---+H20
3.2     , E+F = = > G + DNA_A_Replicated_Over_One_Day
54.34   , G = A
END  ( <==-- Make sure this END is here)

Run Kintecus: >Kintecus -c
Now copy the created ADDSPEC.TXT file as a SPECIES.DAT file
Edit the initial concentration fields in species.dat for your model and
type "Y" in the DISPLAY field for species' concentrations you want to save.
Run kintecus: >KINTECUS -ig:mass -ig:charge -show.
That's all.



Using Netscape/Webrowser/Mosaic: 
under Software/MS-DOS

Using FTP:

FTP ccl.osc.edu
under pub/chemistry/software/MS-DOS/kintecus
(remember to use the same exact case of the letters, and don't forget
to get it using binary transfer mode.)


>FTP ccl.osc.edu
PASSWORD:(enter your E-mail address)
ftp>cd pub/chemistry/software/MS-DOS/kintecus
ftp>mget *.*

(... END OF TEXT ...)

More information about the Info-gcg mailing list

Send comments to us at biosci-help [At] net.bio.net