Darek F wrote:
>> Hi, has anyone figured out how to change successfully IP address for
> built-in Ethernet card in a Flash ROM on 3100 instrument? The default ends
> at 0.1 which is also a default for most of the firewall servers.We tried it
> but it didn't work out. We changed it in the control panel network settings,
> then using serial cable and hyperterminal on the instrument, and also in a
> batch file for Data Colletion software. We almost did it.But it failed.The
> instrument boot up we got a green light but it was offline.
> Any piece of advice?
> regars
> DArek
We had our 3100 installed today so I asked the engineer. Her said the IP
address is stored on one of the cards in the machine itself so if you
want to change it you'd have to change the card.
Kev
---
