Phillip San Miguel wrote:
> [...]
> [1] Note that all samples must be drawn in pairs, as usual. That is, the
> 3700 has dual loading probes 18 mm apart and insists on loading in pairs
> using both. To be more specific, if you load a sample from well "A1" of
> a 384-well plate, "A5" must also be loaded. Or at least that is the way
> it was. I presume this is still the case.
Sorry, I'm 90 degrees off here... This should read: if you load a sample
from well "A1" then "E1" is also loaded.
Phillip
---